Net weight: 21.5kg
Size: 660*605*680

Introduction: PD135 dryer, new transparent design, using Archimedes spiral channel to reduce resistance and increase input at the same time, the bottom of the dryer is sent to the back, drying faster; built-in high-precision sensors and pass protection components, fully ensure the safety of goods, 135L large space contains a variety of sleeping positions, improve the drying system of human-to-human interaction in all aspects. Dry quickly at 30 minutes. The new model is designed for 12 times per minute. The tone of "Zuo" is as low as 34db, so don't play with peace of mind. It can be used as a dog and a small dog.

Point:
1. New system, take a big breath! The boxes are so empty. 1620L/min air traffic volume, every minute to breathe a good empty. 12 times per minute.
2. My heart is full of grief. The intelligent blow box will not be cold and cold. 16C~40 ℃ C can be operated, the precision control technology of constant temperature is set up, and the amplitude of amplitude wave is ±1 ℃. I will buy sense of security for you with multiple guardians. That is, the time test box is changed, and it is safe and safe.
A. NTC intelligent control system. 4 sets of NTC sensitivity detectors, 10 precision checks per second
B. PTC plus technology. 2 sets of PTC, no large space, only 2 minutes to raise 20 ℃
* according to the number of precision checks derived from the component configuration specification, the accuracy check is 10 times per second.
* according to the specification of components, it takes no more than 2 minutes to raise 20 °C in the box.
3. It blows through. Blow the dead horn! I feel refreshed all over. If you feel good about your belly from the bottom, you can also blow through the abdomen, claws and other parts of the belly, claws, and so on.
4. It's a huge space. Super spacious! Tolerate the variety of TA, no matter how small you can love. 135L super-large space, large enough to meet the needs of a variety of families.
5. New transparent devices (removable grid cover), there is a steady stream of new empty devices. We will make a bigger deal and speed up the circulation of air vehicles.

-use the license
1. Regular operations:
a. Turn on the power supply for a long time
b. Slide to solve the problem, and press the button to light up after success.
c. If you slide again, you can load it. After success, only the power source and setting button will be lit.
d. Short press the power source to light up.
e. The brightness of the power source can be reduced by long-term pressure.
f. Press the power source shutdown again

2. Drying mode setting
a. Short press mode press "cut" to soak drying / fast drying mode
b. Enter the settings according to the settings, and improve the degree of integrity by increasing the number of settings.
c. Press the settings to enter the time settings again, and adjust the working hours by adding and adjusting the working hours
d. Once again, set the input speed according to the configuration, and adjust the speed by increasing the speed.
e. After the setup is complete, click on the start and stop button to start the operation.
Tip: during the drying process, you can adjust the speed by increasing the temperature at any time.
Tip: after the parameters are set, the next time you enter the drying mode, you can start the start-up session directly.

3. Warm winter weather mode (please remove the window before using this mode)
a. Short press mode press "cut" to warm in winter mode
b. Enter the settings according to the settings, and improve the integrity by increasing the number of settings.
c. Once again, set the input speed according to the configuration, and adjust the speed by increasing the speed.
d. After the setup is complete, click on the start and stop button to start the operation.
Tip: during the operation process, you can adjust the speed by increasing the speed from time to time.
Tip: after the parameters are set, the next time you enter the warm winter mode, you can start the switch directly.

4. Summer weather mode (please remove the window before using this mode)
a. Press the short press mode and press "cut" to "summer" mode.
b. Once again, set the input speed according to the configuration, and adjust the speed by increasing the speed.
Tip: during the operation process, you can adjust the speed by increasing the speed from time to time.

5. How to use the fungus mode (please install the window and close the door before using this mode. In the mode of fungus smell, please do not let the material into the drying oven.)
a. Short press mode press "cut" to fast drying mode
b. Then press "Flavor and Mode" to enter the bacterial flavor mode.
c. Press the start and stop button to start the operation
Tip: in order to avoid entering this mode, the operation will slightly wait for 30 minutes after the bacteria are finished, the live oxygen will be completely dissipated, and then the product will be used again.

6. Daily cleaning
a. After the solution, press the power source to turn it off.
b. Turn off the power supply and unplug the power supply.
c. Remove the hair from the suction mouth.
d. And wipe the inside of the box with a dishcloth.
e. If there is sewage, the bottom drainage hole plug can be removed.
f. Disassemble and wash the rear seat
g. Cotton can be washed with clean water, dried through the net, and then packed back.

Pay attention to things:
-before use
1. Open the door, remove the window window, and treat the goods as dogs / dogs for days to suit the internal environment of the oven.
2. Open the summer warm / winter warm mode, and let the objects explore and adapt to the sound emitted by the drying oven in the case of low speed.
-in use
1. Please do not allow the goods to open the line range for easy inspection and immediate safety:
2. It is recommended to open the drying mode first, so that the soft speed and sound can make things adapt more quickly.
3. After the status of the puppy and the dog is set, slowly increase the speed or cut to the fast drying mode, always check the condition of the product and adjust it at the right time.

The use of PD135 in the blowing box (reminder)
1. It is recommended that before using this equipment, let the equipment adapt to the internal environment of the blowing box in advance. (open the door)
2. When the equipment is in use, the owner is invited to watch it on the site so that it can be checked and accompanied by safety.
3. This equipment is only suitable for use in a dry environment. Please do not install or use this equipment on the wet ground.
4. Short-nosed dogs / puppies are born with special respiratory tract, which is not conducive to nasal circulation. Heatstroke and asphyxiation should be used with caution.
5. When using the blowing function, please check the status of the equipment immediately. If the object does not feel good, you can lower the temperature and speed. If the condition is not good, please stop using it immediately.
6. When using the blower box for the first time, as the object is sensitive to sound, it is recommended to open the blowing mode first and select 1 file to blow as soon as possible.
7. When using the blowing function, do not place the blower.